Retaining Washers

In stock

A Plastic Retaining Washer is primarily used to hold screws and bolts in place during assembly and have a design that grips the outside of screw or bolt shank. Also known as an Anti Loss Washer, they provide insulation, cushioning and spacing. They help insulate fastening assemblies from moisture and electricity.

This washer range includes options with internal and external teeth with a tapered design. The washer easily slides on to the screw (or bolt) and is retained by the screw once assembled. The washer cold forms and fully enters the pitch of the screw to provide sealing.

These washers allow for preliminary mounting of the screw (or bolt) before securing with a nut. They are ideal when pre-assembly of the screw and washer is required. They also help reduce assembly time and cost.

The range includes material options that provide corrosion, abrasion and chemical resistance.

Materials: Polycarbonate (PC), Polyamide 6.6 (PA) and High Density Polyethylene (HDPE)
Colour: Natural

Print page

Request a quote

For large volumes and customised products, add to your cart and click request a quote, orcontact usand we will respond within 2 working days.

140 results

Sort by

None

Product SKUs information
Price range	Availability	Material	Inside Diameter	Outside Diameter	Thickness
R 2,2764 - R 2,5889	Request the lead time here	HDPE		0.374 in 9.5 mm	0.039 in 1.0 mm

R 1,6782 - R 2,304	300 In stock - Delivery conditions may apply, visit our FAQs	PA		0.709 in 18.0 mm	0.059 in 1.5 mm

R 2,3066 - R 5,5344	Request the lead time here	HDPE	0.252 in 6.4 mm	0.551 in 14.0 mm	0.047 in 1.2 mm

R 2,985 - R 6,8041	Request the lead time here	HDPE		0.472 in 12.0 mm	0.063 in 1.6 mm

R 1,179 - R 1,6356	Request the lead time here	PA		0.512 in 13.0 mm	0.106 in 2.7 mm

R 1,9146 - R 2,1858	Request the lead time here	LDPE		0.787 in 20.0 mm	0.039 in 1.0 mm

R 1,9342 - R 2,688	Request the lead time here	PA	0.413 in 10.5 mm	0.709 in 18.0 mm	0.059 in 1.5 mm

R 0,95 - R 0,95	420 In stock - Delivery conditions may apply, visit our FAQs	Nylon		0.472 in 12.0 mm	0.055 in 1.4 mm

R 4,281 - R 7,8082	Request the lead time here	PA		1.181 in 30.0 mm	0.118 in 3.0 mm

R 0,7552 - R 0,7552	Request the lead time here	PA		0.197 in 5.0 mm	0.059 in 1.5 mm

R 3,3423 - R 4,6223	Request the lead time here	PA	0.492 in 12.5 mm	0.709 in 18.0 mm	0.059 in 1.5 mm

R 0,7481 - R 0,7481	Request the lead time here	PA		0.197 in 5.0 mm	0.039 in 1.0 mm

R 0,6514 - R 0,6514	Request the lead time here	PA		0.354 in 9.0 mm	0.055 in 1.4 mm

R 1,8844 - R 2,1703	Request the lead time here	HDPE		0.394 in 10.0 mm	0.039 in 1.0 mm

R 1,3227 - R 1,8489	500 In stock - Delivery conditions may apply, visit our FAQs	Nylon		0.591 in 15.0 mm	0.059 in 1.5 mm

R 0,6599 - R 0,6599	Request the lead time here	PA		0.315 in 8.0 mm	0.039 in 1.0 mm

R 1,4352 - R 1,6432	Request the lead time here	HDPE		0.315 in 8.0 mm	0.031 in 0.8 mm

R 0,6599 - R 0,6599	1000 In stock - Delivery conditions may apply, visit our FAQs	PA		0.217 in 5.5 mm	0.083 in 2.1 mm

R 0,6883 - R 0,6883	800 In stock - Delivery conditions may apply, visit our FAQs	PA		0.394 in 10.0 mm	0.039 in 1.0 mm

R 1,7493 - R 2,4463	Request the lead time here	Nylon		0.709 in 18.0 mm	0.079 in 2.0 mm